| Set active configuration |
Here you should specify the configuration you want to work with.
New configurations can be received when updating. |
| Database autosaving period (mins) |
The time interval at which the program will autosave the auction data.
It is necessary in case of any problems with the computer. If the value is set to 0, there will be no autosaving. |
| Display Auction Newsboard |
Sets the Newsboard display mode.
Automatically - if there is at least one message, Newsboard is displayed; otherwise Newsboard is automatically hidden
Always - Newsboard is always displayed despite the fact whether the message is there or not
Hide - Newsboard is not displayed at all
|
| Run the program at the Windows start up |
If the checkbox is checked AuctionNavigator will be run at the Windows start up, if it is not checked you are to run AuctionNavigator manually. |
| Primary SNTP time server |
Specify here the information about the primary SNTP server. SNTP is
a server that serves as a source of exact time and allows you to set the exact time on your computer.
You can use a number of free SNTP servers located on the Internet. You can read why you need to synchronize
your clock here. |
| Secondary SNTP time server |
Similarly to "Primary SNTP time server" |
| Synchronize PC clock on program start |
If this checkbox is on, an attempt to synchronize your clock will be made at the program startup. |
| Synchronize after establishing a DialUp connection |
Synchronization is done when a DialUp connection is established. |
| Set the time automatically |
The time on your computer will be automatically corrected, otherwise you will see
the information about how incorrect your time is in the log. |
| Show warning messages |
Show/Do not show synchronization messages. This option does not influence
the display of messages in the log. Log messages are always displayed. |
| Synchronization period (mins) |
The program can perform time synchronization automatically at certain time
intervals. If the value is set to 0, synchronization will not be done. |
| Shift between one server(ms) |
AuctionNavigator makes several requests to one and the same server to get
more accurate time. Here you should specify the largest possible shift between these values.
This value is specified in milliseconds, which means that the shift of 5 seconds must be entered as 5000. |
| Shift between the primary and secondary(ms) |
Similar to the previous parameter, but it is the largest possible shift
between the primary and secondary servers. |
| Do not establish DialUp connection |
Do not establish a DialUp connection. The program does not create
the DialUp plan and will not dial to connect to the Internet. |
| Establish DialUp connection with |
Allow the program to establish the specified DialUp connection.
In this case the program will connect to the Internet automatically to place a bid. |
| Connection at the program startup |
Once the program is started, it will start dialing to connect to the Internet. |
| Begin dialing before the auction starts(mins) |
It takes some time to dial and establish a connection. That is why for a
DialUp connection to be already established, this parameter is specified. |
| Dialing attempts |
A dialing attempt can be unsuccessful. This parameter specifies the largest
possible number of dialing attempts. |
| Pause between attempts |
If a dialing attempt is unsuccessful, this parameter specifies the time after
which the next dialing attempt will be made. |
| Auction time zone |
Auctions can be held in various time zones. Here you can see the information in
what time zone the current auction is held. |
| Your time zone |
The information about your time zone. This information is taken from your Windows settings. |
| Use the Windows time zone ... |
Use the Windows settings to define the time offset between your time and the
eBay time. If your time zone is entered incorrectly, you will not be able to receive the
correct time when the auction ends. In this case you should enter the time offset manually. |
| Specify time offset manually |
The offset will not be defined automatically, but using the parameter below. |
| The offset between my local time and eBay |
The offset between your time and the eBay time time. This value can have the sign either "+" or "-" |
Visit our
